Ricambi Motori Nitro a scoppio

Traxxas Guarnizioni Testa 3.3 - 5292

4,62 €

Disponibile in 10/15 giorni

Gaskets, cooling head: 0.20, 0.30, 0.40mm (1 each) (0.30mm stock) (TRX® 3.3) Gaskets, cooling head: 0.20, 0.30, 0.40mm (1 each) (0.30mm stock) (TRX 3.3)

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Spinotto E G'' Clips''' - 5291

4,62 €

Disponibile in 10/15 giorni

Wrist pin, wrist pin clips (2) (TRX® 3.3) Wrist pin, wrist pin clips (2) (TRX 3.3)

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Accoppiamento Trx 3.3 - 5290

73,87 €

Disponibile in 10/15 giorni

Piston/sleeve (matched set), wrist pin clips (2) (TRX® 3.3) Piston/sleeve (matched set), wrist pin clips(2) (TRX 3.3)

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Albero Motore Trx25/3.3 No Starter - 5288R

37,08 €

Disponibile in 10/15 giorni

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Alberino Starter Trx 25/3.3 - 5277

9,66 €

Disponibile in 10/15 giorni

Shaft, starter (TRX® 2.5, 2.5R, 3.3) Shaft, starter (TRX 2.5, 2.5R, 3.3)

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Tappo Carter Motore Trx 2.5/3.3 Senza Avviamento - 5274R

10,50 €

Disponibile in 10/15 giorni

Backplate/ 20x1.4mm O-ring (for engines w/o starter) (TRX® 2.5, 2.5R, 3.3) The aluminum backplate replaces the EZ-Start® drive unit on the TRX 2.5, TRX 2.5R, and TRX 3.3 Racing Engines. It allows more efficient fuel/air mixture flow through the crankcase and significantly reduces overall engine weight. It’s perfect for building that racing version of the Nitro 4-Tec or other racing model that is using a rear exhaust TRX Racing Engine. Using the backplate requires an electric bump starter and should only be used on models with unobstructed flywheel access. If the engine was originally equipped with a starter, then a different crankshaft is also required. Use Traxxas part 5288R (IPS) or 5289R (multi-shaft) crankshaft.

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Carburatore Completo Trx2.5/Trx3.3 - 5252

45,90 €

Disponibile in 10/15 giorni

Carburetor, complete (minus air filter assy) (TRX® 2.5, 2.5R composite slide) Carburetor, complete (minus air filter assy.) (TRX 2.5, 2.5R composite slide)

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Spillo Del Minimo Trx25 - 5251

4,59 €

Disponibile in 10/15 giorni

Needle, low-speed/ 2x1mm O-ring (2) (TRX 2.5, 2.5R) Needle, low-speed/ 2x1mm O-ring (2) (TRX 2.5, 2.5R)

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Spillo Del Massimo Trx 2,5/3,3 - 5250

11,48 €

Disponibile in 10/15 giorni

Needle assembly, high-speed (with fuel fitting)/ 2.5x1.15mm O-ring (2)/ 5.3x7.8x.6mm crush washer (2) (TRX® 2.5, 2.5R) Needle assembly, high-speed (with fuel fitting)/ 2.5x1.15mm O-ring (2)/ 5.3x7.8x.6mm crush washer (2) (TRX 2.5, 2.5R)

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Pivot Comando Gas Trx25 - 5243

6,92 €

Disponibile in 10/15 giorni

Throttle arm, carburetor/ 3mm set screw (1-each) (TRX® 2.5, 2.5R) Throttle arm, carburetor/ 3mm set screw (1-each) (TRX 2.5, 2.5R)

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Vite Regolazione Minimo Trx 25 - 5241

5,08 €

Disponibile in 10/15 giorni

Screw, idle speed/ 2x1mm O-ring (1-each) (TRX® 2.5, 2.5R) Screw, idle speed/ 2x1mm O-ring (1-each) (TRX 2.5, 2.5R)

Compra Dettagli

Aggiungi al carrello Mostra dettagli

Traxxas Testa Motore Trx 3.3 - 5238R

42,55 €

Disponibile in 10/15 giorni

Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX® 3.3), head protector (1), 3x6mm CCS (5) Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX 3.3), head protector (1), 3x6mm CCS (5)

Compra Dettagli

Aggiungi al carrello Mostra dettagli