Combo Brushless Sensorless WP 130A 2-4s 2000KV 1:8 Orion Vortex Neon 8 ORI66094
Vortex NEON - The energy booster! Do you need more power for your racer? We have the solution! ...
The Vortex NEON 8 series is primarily aimed at the owners of 1/8 ReadySet vehicles who want a few simple steps to make your racer a huge performance increase. Of course, the system can also be installed in all "normal" 1/8 RC Cars, whether off-road or on-road. The set contains the high-performance brushless motor with aluminum casing and the matching controller. The system is designed sensorless and allows a particularly easy handling.
The installation is very easy! Remove the old motor and controller from the vehicle and install the new Vortex NEON 8 components - finished! ... The controller is already programmed and with a standard setup, the adaptation to the remote control is easy and done in a few steps. Here, the standard gear ratio will remain unchanged from the model!
What you can now do on the slopes with your Racer is difficult to put into words. Incredible top speed, acceleration and uncompromised driving pleasure in a new dimension. By using an appropriate Team Orion LiPo Car batteries can increase the performance potential of your Racers again ...!
Features:
High-performance brushless electric motor
Motor brushed aluminum case
High-performance brushless controller
Sensorless System
Controller 100% Waterproof
Suitable for 1/8 RC Cars
Extremely high efficiency
Designed for use with standard gear ratio
Supplied with standard setup voreigestelltem
Stylish Carbon Design
Built-in cooling fan and capacitors
Simple Advanced Programming
Anti-cogging system (no jerking when accelerating)
Spec:
Motor: KV: 2.000U / V
Poles: 4;
Voltage range: 7.2 to 16.8 V (2-4s LiPo)
Motor Size: D40, 2xL61mm
Diameter Shaft: 5mm
Connector: 4mm gold connectors
Weight: 344g
Controller Input voltage: 7.4 to 14.8 V / 2-4 cell LiPo
BEC receiver power supply: 6V / 3A
continuous current: 130A
Max Surge Current: 760A
Max, KV: 3,000 (4s) / 4.000 (3s) / 6,000 (2s)
Weight: 110g
Dimensions: 59,3 x38, 4x33, 6mm
BL system: sensorless 2-Pol/4-Pol
Scheda tecnica
- Model Category:
- Off-Road
- Type:
- Buggy
- Construction:
- Sensorless
- Scale:
- 1:8
- Propulsion Technique:
- Brushless
- Technology:
- 4 Pole
- Level:
- Professional
- Diameter [mm]:
- 40
- KV (RPM / VOLT):
- 2000
- Ampere [A]:
- 130
- Max Voltage [V]:
- 16.8
- Contenent:
- 1 Kit
STATO DEL PRODOTTO | SIGNIFICATO |
---|---|
Disponibile |
Prodotto presente nel magazzino Italia. |
Disponibile in 10/15 giorni |
Prodotto non presente, ma ordinabile dal fornitore. |
Non disponibile |
Prodotto terminato non ordinabile. |
Ultimi articoli in magazzino | Ultimo pezzo. |
- "Perfetto!!! - Talamandre
- "Miglior negozio online di modellismo" – Pietro G.
- "Fast shippment ! excellent job ! Thank you!" – Mario C.
- "Tanti consigli…personale preparato!" – Paolo M.
- "Produit conforme, livraison rapide et bien emballé, parfait ! +++" – Jerome
- “Miglior negozio di modellismo in Provincia di Torino” Gianmarco F.