chevron_left
chevron_right
Absima 1:10 EP Monster Truck "AMT3.4" 4WD RTR - 12224
La tua sicurezza è la nostra priorità. Approfondisci...
Politiche per le spedizioni. Approfondisci...
Politiche per i resi merce. Approfondisci...
La storia di successo continua! Abbiamo dotato l'AMT3.4 "V2" di alcune nuove caratteristiche che portano il veicolo al livello successivo di evoluzione.
Alcune modifiche tecniche sono state implementate nel nostro monster truck in scala 1/10: tra le altre cose, il veicolo è ora dotato di illuminazione a LED sul tetto
- NOVITÀ* Regolatore di velocità a spazzole da 80 A con connettore a T e motore 540
- NOVITÀ* Regolatore di velocità programmabile
- NUOVO* Servosterzo da 15 kg con ingranaggi in metallo
- NOVITÀ* Illuminazione a LED
- NOVITÀ* Carrozzeria monster truck con molte parti aggiuntive
- NOVITÀ* ancora più parti opzionali disponibili
The new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.
The car is powered by a 550size 18T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity.
8(!) oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 15kg metal gear servo with takes over the implementation of the steering commands.
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
- 4WD all wheel drive
- 2.4 GHz 4-channel radio system
- 80A brushed speed controller with T-plug
- 550size 18T motor with 28.000RPM @ 7.4V
- 15kg MG steering servo (25T, ball bearings)
- 8 Oil shock absorbers
- Ball bearing main drive
- Extremely durable composite plastic parts
- Steel differential outputs
- Aluminum main drive shaft with steel mounts
- Adjustable upper tie rods
- 5mm aluminum motor mount
- 6mm shock towers
- 2 differentials (front/rear)
- Stylish truggy body with add-on parts
- "Light-Weight" chassis (less weight - longer drive time)
- Many aluminum option parts available
- Scale: 1:10
- Dimensions (L/W/H): 425x300x200 mm
- Weight: 2070g
- Wheelbase: 270mm
- Ground clearance: ca. 45mm
- Track width: 250mm front/rear
- Wheels front/rear: Ø 116mm / Width: 57mm
- Shock absorber oil: 400CPS
- Shock absorber installation length: 100mm
- Motor ratio: pinion: 17T / main gear: 64T (module 0,6)
- 1/10 Monster Truck "AMT3.4V2" RTR
- 2.4GHz "CR4S" radio
- Sticker sheet
- Manual
- 4x AA Batteries for radio
- 7.2V NiMH or 7.4V* LiPo car battery (*recommended)
- Charger (suitable for car battery)
- Programm card for individual settings of the speed controller
| STATO DEL PRODOTTO | SIGNIFICATO |
|---|---|
| Disponibile |
Prodotto presente nel magazzino Italia. |
| Disponibile in 10/15 giorni |
Prodotto non presente, ma ordinabile dal fornitore. |
| Non disponibile |
Prodotto terminato non ordinabile. |
| Ultimi articoli in magazzino | Ultimo pezzo. |
- "Perfetto!!! - Talamandre
- "Miglior negozio online di modellismo" – Pietro G.
- "Fast shippment ! excellent job ! Thank you!" – Mario C.
- "Tanti consigli…personale preparato!" – Paolo M.
- "Produit conforme, livraison rapide et bien emballé, parfait ! +++" – Jerome
- “Miglior negozio di modellismo in Provincia di Torino” Gianmarco F.